Short-term forecasting of residential and commercial building energy consumption is widely used in power systems and continues to grow in importance. Data-driven short-term load forecasting (STLF), although promising, has suffered from a lack of open, large-scale datasets with high building diversity. This has hindered exploring the pretrain-then-fine-tune paradigm for STLF. To help address this, we present BuildingsBench, which consists of: 1) Buildings-900K, a large-scale dataset of 900K simulated buildings representing the U.S. building stock; and 2) an evaluation platform with over 1,900 real residential and commercial buildings from 7 open datasets. BuildingsBench benchmarks two under-explored tasks: zero-shot STLF, where a pretrained model is evaluated on unseen buildings without fine-tuning, and transfer learning, where a pretrained model is fine-tuned on a target building.

Transfer Learning (TL) is currently the most effective approach for modeling building thermal dynamics when only limited data are available. TL uses a pretrained model that is fine-tuned to a specific target building. However, it remains unclear how to proceed after initial fine-tuning, as more operational measurement data are collected over time. This challenge becomes even more complex when the dynamics of the building change, for example, after a retrofit or a change in occupancy. In Machine Learning literature, Continual Learning (CL) methods are used to update models of changing systems. TL approaches can also address this challenge by reusing the pretrained model at each update step and fine-tuning it with new measurement data. A comprehensive study on how to incorporate new measurement data over time to improve prediction accuracy and address the challenges of concept drifts (changes in dynamics) for building thermal dynamics is still missing. Therefore, this study compares several CL and TL strategies, as well as a model trained from scratch, for thermal dynamics modeling during building operation. The methods are evaluated using 5--7 years of simulated data representative of single-family houses in Central Europe, including scenarios with concept drifts from retrofits and changes in occupancy. We propose a CL strategy (Seasonal Memory Learning) that provides greater accuracy improvements than existing CL and TL methods, while maintaining low computational effort. SML outperformed the benchmark of initial fine-tuning by 28.1\% without concept drifts and 34.9\% with concept drifts.

Transfer learning (TL) can improve data-driven modeling of building thermal dynamics. Therefore, many new TL research areas emerge in the field, such as selecting the right source model for TL. However, these research directions require massive amounts of thermal building data which is lacking presently. Neither public datasets nor existing data generators meet the needs of TL research in terms of data quality and quantity. Moreover, existing data generation approaches typically require expert knowledge in building simulation. We present BuilDa, a thermal building data generation framework for producing synthetic data of adequate quality and quantity for TL research. The framework does not require profound building simulation knowledge to generate large volumes of data. BuilDa uses a single-zone Modelica model that is exported as a Functional Mock-up Unit (FMU) and simulated in Python. We demonstrate BuilDa by generating data and utilizing it for pretraining and fine-tuning TL models.

Transfer Learning (TL) is an emerging field in modeling building thermal dynamics. This method reduces the data required for a data-driven model of a target building by leveraging knowledge from a source building. Consequently, it enables the creation of data-efficient models that can be used for advanced control and fault detection & diagnosis. A major limitation of the TL approach is its inconsistent performance across different sources. Although accurate source-building selection for a target is crucial, it remains a persistent challenge. We present GenTL, a general transfer learning model for single-family houses in Central Europe. GenTL can be efficiently fine-tuned to a large variety of target buildings. It is pretrained on a Long Short-Term Memory (LSTM) network with data from 450 different buildings. The general transfer learning model eliminates the need for source-building selection by serving as a universal source for fine-tuning. Comparative analysis with conventional single-source to single-target TL demonstrates the efficacy and reliability of the general pretraining approach. Testing GenTL on 144 target buildings for fine-tuning reveals an average prediction error (RMSE) reduction of 42.1 % compared to fine-tuning single-source models.

Short-term forecasting of residential and commercial building energy consumption is widely used in power systems and continues to grow in importance. Data-driven short-term load forecasting (STLF), although promising, has suffered from a lack of open, large-scale datasets with high building diversity. This has hindered exploring the pretrain-then-fine-tune paradigm for STLF. To help address this, we present BuildingsBench, which consists of: 1) Buildings-900K, a large-scale dataset of 900K simulated buildings representing the U.S. building stock; and 2) an evaluation platform with over 1,900 real residential and commercial buildings from 7 open datasets. BuildingsBench benchmarks two under-explored tasks: zero-shot STLF, where a pretrained model is evaluated on unseen buildings without fine-tuning, and transfer learning, where a pretrained model is fine-tuned on a target building.

Energy optimization leveraging artificially intelligent algorithms has been proven effective. However, when buildings are commissioned, there is no historical data that could be used to train these algorithms. On-line Reinforcement Learning (RL) algorithms have shown significant promise, but their deployment carries a significant risk, because as the RL agent initially explores its action space it could cause significant discomfort to the building residents. In this paper we present ReLBOT - a new technique that uses transfer learning in conjunction with deep RL to transfer knowledge from an existing, optimized and instrumented building, to the newly commissioning smart building, to reduce the adverse impact of the reinforcement learning agent's warm-up period. We demonstrate improvements of up to 6.2 times in the duration, and up to 132 times in prediction variance, for the reinforcement learning agent's warm-up period.

The decarbonization of buildings presents new challenges for the reliability of the electrical grid as a result of the intermittency of renewable energy sources and increase in grid load brought about by end-use electrification. To restore reliability, grid-interactive efficient buildings can provide flexibility services to the grid through demand response. Residential demand response programs are hindered by the need for manual intervention by customers. To maximize the energy flexibility potential of residential buildings, an advanced control architecture is needed. Reinforcement learning is well-suited for the control of flexible resources as it is able to adapt to unique building characteristics compared to expert systems. Yet, factors hindering the adoption of RL in real-world applications include its large data requirements for training, control security and generalizability. Here we address these challenges by proposing the MERLIN framework and using a digital twin of a real-world 17-building grid-interactive residential community in CityLearn. We show that 1) independent RL-controllers for batteries improve building and district level KPIs compared to a reference RBC by tailoring their policies to individual buildings, 2) despite unique occupant behaviours, transferring the RL policy of any one of the buildings to other buildings provides comparable performance while reducing the cost of training, 3) training RL-controllers on limited temporal data that does not capture full seasonality in occupant behaviour has little effect on performance. Although, the zero-net-energy (ZNE) condition of the buildings could be maintained or worsened as a result of controlled batteries, KPIs that are typically improved by ZNE condition (electricity price and carbon emissions) are further improved when the batteries are managed by an advanced controller.

The design of building heating, ventilation, and air conditioning (HVAC) system is critically important, as it accounts for around half of building energy consumption and directly affects occupant comfort, productivity, and health. Traditional HVAC control methods are typically based on creating explicit physical models for building thermal dynamics, which often require significant effort to develop and are difficult to achieve sufficient accuracy and efficiency for runtime building control and scalability for field implementations. Recently, deep reinforcement learning (DRL) has emerged as a promising data-driven method that provides good control performance without analyzing physical models at runtime. However, a major challenge to DRL (and many other data-driven learning methods) is the long training time it takes to reach the desired performance. In this work, we present a novel transfer learning based approach to overcome this challenge. Our approach can effectively transfer a DRL-based HVAC controller trained for the source building to a controller for the target building with minimal effort and improved performance, by decomposing the design of neural network controller into a transferable front-end network that captures building-agnostic behavior and a back-end network that can be efficiently trained for each specific building. We conducted experiments on a variety of transfer scenarios between buildings with different sizes, numbers of thermal zones, materials and layouts, air conditioner types, and ambient weather conditions. The experimental results demonstrated the effectiveness of our approach in significantly reducing the training time, energy cost, and temperature violations.

--Thermal dynamics modeling has been a critical issue in building heating, ventilation, and air-conditioning (HV AC) systems, which can significantly affect the control and maintenance strategies. Due to the uniqueness of each specific building, traditional thermal dynamics modeling approaches heavily depending on physics knowledge cannot generalize well. This study proposes a deep supervised domain adaptation (DSDA) method for thermal dynamics modeling of building indoor temperature evolution and energy consumption. A long short term memory network based Sequence to Sequence scheme is pre-trained based on a large amount of data collected from a building and then adapted to another building which has a limited amount of data by applying the model fine-tuning. We use four publicly available datasets: SML and AHU for temperature evolution, long-term datasets from two different commercial buildings, termed as Building 1 and Building 2 for energy consumption. We show that the deep supervised domain adaptation is effective to adapt the pre-trained model from one building to another building and has better predictive performance than learning from scratch with only a limited amount of data.